planetary gear box

The Ever-Electrical power is a battle-tested modular planetary gearbox system designed especially for use in the Robotics industry. Designers choose one of four result shafts, configure a single-stage planetary using among six different reductions, or create a multi-stage gearbox using some of different ratio combinations.
All the Ever-Vitality gearboxes include mounting plates & hardware for typical Robotics Competition motors (550, 775 Series, 9015 size motors) — these plates are custom created for each motor to provide perfect piloting and excessive efficiency.
What good is a versatile system if it’s not easy to disassemble and re-configure? That’s why we introduced the Ever-Electricity with assembly screws in the rear of the gearbox. This makes it easy to change gear ratios, encoders, motors, etc. without have to take apart your complete mechanism. Another feature of the Ever-Vitality that means it is easy to use may be the removable shaft coupler system. This system lets you switch motors with no need to buy a special pinion and press it on. In addition, the Ever-Electrical power uses the same pilot and bolt circle as the CIM, allowing you to run a Ever-Power everywhere a CIM motor mounts.
he Ever-Power has a selection of options for mounting. Each gearbox has four 10-32 threaded holes on top and bottom of its housing for easy side mounting. In addition, additionally, there are holes on the front which allow face-mounting. Easily, these holes will be on a 2″ bolt circle; this is actually the same as the CIM motor – anywhere you can mount a CIM-style motor, you can attach a Ever-Power.
Other features include:
Six different planetary equipment stages can be used to produce up to 72 unique equipment ratios, the almost all of any kind of COTS gearbox in FRC or perhaps FTC.
Adapts to a number of FRC motors (Handbag, Mini CIM, RS-550, RS-775, 775pro, Redline, AM-9015, and CIM)
Adapts to a number of FTC motors (AndyMark NeveRest, REV HD Hex Engine, Tetrix TorqueNADO)
ABEC-1/ISO 492 Class Common Bearings, rated for 20,000+ RPM
AGMA-11 quality planet and sun gears made from hardened 4140 steel
The Ever-Electrical power v2 assembly is now held together with screws that install on the “back” (engine side) of the housing. This signifies that the gearbox could be disassembled to improve gearsets without the removal of the gearbox outcome from the robot. Bosses have already been added to the sides of the gearbox therefore when it’s side-attached you can “crank down” on the installation screws without accidentally misaligning a ring-gear stage. The v1 & v2 input and output blocks can’t be blended and matched – A v2 input block can be used with a v2 outcome block. Ring gears and gear kits are suitable between v1 & v2
The bottom Ever-Power kits now include an optional pilot ring that may allow users to pilot the Ever-Power on a 0.75″ hole, instead of relying on screw clearances to find the gearbox. The plastic material motor mounting plates now pilot on the insight block.
Product Overview
Product Usage:
All Ever-Vitality gearboxes require grease for proper operation and long life. We recommend using our reddish tacky grease, am-2768. We also motivate that the user powers the gearbox consistently for 30 minutes without grease to allow the apparatus teeth to have on in. While we perform design and style with short run moments in mind, this ‘run in’ period for smooth gearbox procedure, is recommended. Once that is completed, complete grease of the apparatus teeth periodically to ensure smooth operation.
Single speed planetary gearbox, with the same installation and output interface as a 2.5″ CIM motor. Each planet equipment has its own bearing to spin openly on the carrier plate pins. A 2.5″ CIM Motor may also be used as the motor input, but requires this pinion gear ( am-0556) and a CIM Spacer (am-0555).
Motor Input:
9015 motor fits on this gearbox
550 motor fits upon this gearbox
2.5″ CIM Motor could be installed, with a bored-out sun gear and a spacer
Included Hardware:
Two – 8mm id ball bearings, (19mm od, 22mm od) supporting output shaft
One – Steel world and sun gears, 32 dp, 20 level p.a.
Five – Planet gears (12 tooth)
One – 15 tooth sun equipment, with 0.125 inch bore
One – 40 tooth ring gear
Performance Data:
(with the input being a 9015 Fisher-Price motor)
Input voltage: 12 volts
Stall Torque: 1.12 ft-lb.
Free speed: approximately 4,000 rpm
Assembly Tip:
Install the aluminium plate to the face of the motor Just before pressing the pinion gear onto the motor shaft.
Specifications
Material: body is usually aluminum, shaft is 4140 steel
Mounting Holes: #10-32 tapped holes (2), upon a 2″ bolt circle to attach at output shaft
Exterior dimension: 2.5 in.
Ratio: 3.67:1
Shaft Diameter: 0.313 inch,with 2mm keyway
Weight: 0.63 lbs
Product Features
Stainless steel 416 exceptional non-electrolysis nickle surface treatment
Integrated helical interior ring gear
Patented output sealing systems design
One piece planet carrier with result shaft design
Plasma nitriding
True helical gear design
planetary gear box Advanced gearing technology crowns lead of every gear tooth
Deep groove ball bearing
Lubricated with Nyogel 792D (Smart Grease)
With optional advanced backlash of < 1 arc-min
Planetary Gearbox with Output Shaft
Ever-Ability planetary gearboxes with outcome shaft are well suited for an array of drive solutions.
The output shaft is available in several variations, for example, because an output shaft with feather key for positive-fit and trustworthy power transmission. The feather crucial is a general connecting element within numerous drive pieces and lets you achieve a quick and secure connection between the planetary gearbox with output shaft as well as your application.
The planetary gearbox with smooth output shaft may be the ideal element for achieving a force-fit link with a coupling. This permits you to achieve maximum torque transmission even while in reverse mode.
You can also hook up the planetary gearbox with productivity shaft to your travel system with a toothed shaft. Utilizing a toothed result shaft standardized to DIN 5480, it is very simple to correctly fit additional drive parts for instance a pinion with inner gearing.
The input flange of the planetary gearbox is individually adapted to the engine. The compact unit of planetary gearbox with outcome shaft and servomotor heightens your flexibility.
As a result of rotating output shaft’s low inertia, planetary gearboxes with output shaft are the ideal solution for most dynamic applications. The flexibility of planetary gearboxes with output shaft gives you maximum versatility to pick the right merchandise for your application.
If, despite the compactness of our planetary gearboxes, you need an even shorter gearbox, you will discover a right position planetary gearbox with result shaft here.
INDUSTRIAL PLANETARY GEARBOXES
Complete range of modular design planetary gearboxes for professional applications. It combines high performance with low cost and compact size, good reliability, simple set up and reduced protection. Brevini’s industrial planetary gearboxes come in a range of sizes to ensure optimum length and silent jogging in a variety of applications. These in-range or right-position planetary gearboxes can be purchased in male and female shaft configurations. The male shaft solution (splined or cylindrical) is able to withstand solid radial or axial loads on the outcome shaft.
Search
Go
HomeProductsGearboxesAxial Gearboxg700-P planetary gearbox
g700-P planetary gearboxes
Accuracy in the application.
The g700 planetary gearbox is a great solution for powerful and cost-optimized applications.
Its high-level of reliability, long services life and excellent scalability generate it a precise solution for demanding machine tasks.
Advantages:
For applications in which a medium backlash is necessary
High input speed possible: max. input speed 18,000 rpm
Wide transmission range: we=3 to 512 in 24 ratios
Wide torque range: 44.25 to 7081 lb-in (5 to 800 Nm) in five sizes
Lifetime lubrication for just about any mounting position
Can be combined with the following motors:
With synchronous and asynchronous servo motors in the energy range from 0.33 to 27 Hp (0.25 to 20.3 kW) 2212 to 17,9670 lb-in (250 to 20,300 Nm)
The Ever-Electricity Planetary Gearbox for Power and Precision
vrs inlineFull electricity with the highest degrees of precision. The PlanetGear of Ever-Power gets the necessary power reserves available for the most difficult power transmission requirements.
Advantages:
compact design
higher level of efficiency
high torsional rigidity
low mass moment of inertia torque
high overload capacity
high dynamics
large transmission ratios
Ever-Power offers innovative, customised gearbox solutions in a helical-toothed style. The design of the toothing can be carried out employing KISSsoft and our own design and calculation applications.
In addition to the provision of tech support team and advice to our customers, we also dominate the entire engineering procedure. By working closely as well as our customers, we assure the development and production of the optimum travel solution in each circumstance.