The agricultural gearbox is the main mechanical element of the kinematic chain of agricultural machines. It is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes will have one input shaft and at least one particular output shaft. If these shafts are positioned at 90° to each other, the gearbox is an ORTHOGONAL ANGLE gearbox or more commonly called a right-angle gearbox.
rotary tiller gearbox is definitely adopted middle gear transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally covered after tillage as the functioning width is a lot wider. The quality is reliable and the efficiency is well. So that it can be used on dry and paddy field. It can reduce the time, laboring, and cost, etc. during operation
Increasers and Reducers
When the gearboxes have both gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the input shaft, has the fewer quantity of teeth (pinion), hence the output shaft rotates slower compared to the input shaft.
It is named an increaser when the insight shaft is mounted on the apparatus with the larger amount of teeth (crown), hence the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it really is called a distributor when there are at least two output shafts.
It really is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.
in addition to the main pair of gears and relevant shafts, the gearboxes may also have gearbox for agricultural machinery various other gears with a different number of teeth. The gear shift of the main pair of gears with the secondary types enables different speeds. The manual change of the secondary equipment pair with gears with different quantity of teeth allows adjustments to the result rotation speed.
CMR GROUP will be able to design and produce also agricultural machinery applications.