The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with an integrated limit switch system that’s suitable for assembly of a locally available electric electric motor. The Gearbox is used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox can be rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmitting ensures that the drive shaft can be locked when the reduction gearbox isn’t running. The fully sealed reduction gearbox has an expansion chamber with a diaphragm to keep the gear essential oil at a low pressure under all situations, even at high temps. Thanks to the use of an expansion chamber, the Gearbox could be installed in any position. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction gearbox keeps the gear oil of the Gearbox in optimum condition for its entire operating life time. The Gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gearbox has an FT85 motor assembly flange, to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit change system is Gear motors for Greenhouse accessible and easy to adjust. The limit switch system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).