High-Quality Right Angle Gear Drives are designed for efficiency, quiet procedure, and long service existence. SDP/SI provides a broad collection of Right Angle Gear Drives in various configurations, materials, operating speeds, and multiple ratios. Standard catalog products include precision and industrial quality gear drives provided in both ” and metric sizes. For modifications or custom designs contact and talk with a SDP/SI applications engineer.
Our offering includes, but is not limited to the next:
Miniature sized Right Angle Gear Drives, 1 inch square, are ideal for compact designs that require low backlash and input boosts to 2000 rpm.
When weight is an issue, get Correct Angle Bevel Gear Drives that feature a lightweight casing of PTMT Polyester 30% glass filled, precision floor stainless shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Equipment Drives accommodate input boosts to 2000 rpm and so are available in gear ratios: 5:1, 10:1 and 20:1.
Right Position and Dual Helical Gear Drives are offered in two versions, light-duty, rated speeds up to 600 rpm and durable, rated boosts to 1725 rpm.
An economy series of Correct Angle Bevel Gear Drives is offered in 1:1 and 2:1 ratios and rated boosts to 500 rpm.
E Series Right Angle
The Ever-Power Electronic Series is a high efficiency, right angle gear reducer designed for increased torque density, reduced inventory and improved efficiency. Through the use of modified helical-bevel technology, the E Series is able to operate at 90% effectiveness and can provide up to 60% higher torque when compared to a typical worm equipment reducer. Through various components and modular elements, the E Series recreates the essential dimensions of a typical worm gearbox and the opportunity to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with rankings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill the requirements of our OEM clients. Our close partnerships with our installed customer foundation provided much insight into their evolving need for more high-precision right-position gearing options. To be able to fill that need, Ever-Power extended upon our correct angle product offering to include a variety of high-precision worm gearboxes, referred to as our EP Series.
These servo grade speed reducers are ideal for the most difficult of movement control applications. Each series incorporates a globoidal worm gear mesh design in order to obtain the torque handling capacity and the best levels of precision that our SHIMPO customers attended to expect from us. The insight style of our EP right-angle gearbox applies the same idea of motor modularity that is common across our High Precision item family, meaning our customers and distribution partners get the same level of flexibility, product variety, and overall availability that is unparalleled in your industry.
Benefits of the EP Series platform design;
Quiet operation, in comparison to other competitive worm gearing
Compact, with exact reduction ratios
High torsional rigidity and torque carrying capacity
A reduced backlash feature, unique among right-angle gearheads
Industry regular hollow bore result with other shafted options
Extremely lightweight, optimized construction
Maintenance free, lubrication for lifetime
These right-angle servo grade gearboxes are perfect for applications within custom assembly and test systems, packaging equipment, metal cutting and metal forming machinery, general purpose auto, among numerous others. If the application requires the compact footprint of a right-angle worm gear without sacrificing on the performance, contact Ever-Power about the EP Series today.
Standard Right Position Gearbox Features
All ratios equipped with right-hand worm gears
Load capacity unaffected simply by direction and rotation
Selection of mounting Options
Upon Request:
Left-Hand Gears
Stainless Steel Input/Output Shafts
Solid or Hollow Output Shaft
Select a Gearbox or Speed Reducer
Worm Gear Quickness Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Equipment Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Angle Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor performance is important. Get in touch with our technical sales staff for help determining which gearbox alternative is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and allow for a corner change with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest procedure of our acceleration reducers. These gearboxes are created to handle varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size can be available with plastic material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best result torque of all our swiftness reducers. These gearboxes are made to manage varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their gear cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work very well in environments with limited space. Our parallel shaft gear reducers offer an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, rate reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a equipment in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.
While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm equipment reducers is certainly that they create an output that’s 90° from the insight and can be utilized to transmit higher torque or reduce rotational speed. Most often, a worm gearbox offers right hand threads; to improve the path of the output, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Cast Iron Worm Gear Reducers are available in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The systems have a one piece #Fc20 all cast iron housing, NEMA motor quill style insight flanges or shaft inputs, come pre-packed with synthetic oil and also have a 12 months warranty.
Features:
right angle worm gearbox Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied outside and inside of the gearbox
Air dry special black paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
OUTPUT SHAFT THRUST LOAD (LBS.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear 
acceleration reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in lbs. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water products drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where large torques/slower speeds are needed.
These reducers are also available with a helical major reduction stage and are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or quickness reducers, are open gears contained in a housing. The casing facilitates bearings and shafts, retains in lubricants, and protects the elements from surrounding conditions. Gearboxes can be found in an array of load capacities and speed ratios.
The objective of a gearbox is to increase or reduce speed. Consequently, torque output would be the inverse of the function. If the enclosed drive is usually a quickness reducer, the torque output increase; if the drive boosts speed, the torque output will decrease. Gear drive selection elements include: shaft orientation, speed ratio, design type, nature of load, gear rating, environment, mounting position, operating temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction swiftness reducer can achieve up to 100:1 decrease ratio in a little package. Known as right angle drives, these contain a cylindrical worm with screw threads and a worm. With an individual start worm, the worm equipment advances only 1 tooth for each 360-degree convert of the worm. So, regardless of the worm’s size, the apparatus ratio is the ‘size of the worm equipment to 1′. Higher reduction ratios can be created through the use of double and triple decrease ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 pieces of gears. Power is certainly transmitted from a high-velocity pinion to a slower-speed gear. Helical gears generally operate with their shafts parallel to each other. Both most common types will be the concentric (input and output shafts are in collection) and parallel shaft (insight and output shafts are offset). Single-stage helical equipment reducers are typically used for equipment ratios up to about 8:1. Where reduce speeds and higher ratios are necessary, dual, triple, and quadruple equipment reduction stages can be used.
