Material Handling Energy UNIT two
This power unit functions power up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve using the lowering velocity managed through the strain compensated movement management valve. Items of this series could be extensively used in the market of logistic gadgets for example fork lift, mini lift table, and so forth.
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned ahead of mounting the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is required immediately after the initial 100 operation hrs,afterwards as soon as every single 3000 hours.
five. The power unit must be mounted horizontally.
Materials Dealing with Electrical power UNIT one
This electrical power unit is developed for the fork lift industry, consisting of extremely effective gear pump, DC motor, guide raise and lower valve, tank, ect. The up and down movement are managed from the lever of the manual release valve, and that is equipped with an electric switch to activate the motor. The lowing pace is controlled through the pressure compensated flow control valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned in advance of installation of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is required just after the original 100 operation hours, afterwards the moment every 3000 hrs.
five. The power unit shown is created to be mounted horizontally.