Liquid-Ring Vacuum Pump

A liquid band vacuum pump is easy to operate and is utilized in a number of applications across various industries. A liquid ring pump works together with a sealant required in its Liquid-Ring Vacuum Pump china operation. This liquid can be water, oil or any additional solvent which is usually rotated by an impeller within the casing of the pump.

As the shaft turns, a liquid ring is established by the centrifugal force generated by the rotating impeller. This power holds the liquid ring against the inner wall of the pumping chamber. Since the impeller is located eccentric to the pumping chamber, the depth of access of the blades into the liquid ring decreases and boosts as the impeller rotates. This creates increasing cellular volume on the inlet slot side, creating vacuum.

On the discharge interface side, the impeller cell volume decreases as the blades move further in to the liquid band. This increases the pressure until discharge takes place through the discharge port.

A continuous flow of new sealing liquid comes to the pump via the sealing-liquid inlet.

In the case of the two-stage liquid ring pump, the discharge from the 1st stage does not discharge to atmosphere. Instead, the 1st stage discharges through the manifold leading to the second stage as well as through a discharge port situated in the intermediate plate between the first- and second-stage impellers.