helical worm gear motor

Helical-worm gearmotors
Due to their style and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and thus avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you expect a drive alternative to impress you with its high level of overall performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular system. In this manner, they offer you an enormous range of sizes, equipment ratios and motor sizes.
However, their greatest power is certainly their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a powerful drive solution which you will hardly actually hear.
The overall concept also offers you many more practical product characteristics and benefits. Included in these are the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear units. This is how you save additional energy in the operation of your systems and so are able to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with an array of AC motors. Furthermore, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits offered by this combination of low-noise helical-worm gear unit and performance-optimized motor. Even greater variance may be accomplished because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving time and money with this selection and project planning. This is because our modular system allows a multitude of combination options for gear products and motors. You can consequently reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with our AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional strength and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding effectiveness, these drives can be utilized in every industrial sector and customized to person helical worm gear motor Torque and swiftness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel material with unique lubricants, optimized form, this powerful motor achieves high degrees of efficiency and torque. The casing machined on all sides allows diverse mounting options. Double chamber shaft seals are utilized as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and floor worm gears: Provides higher efficiencies and higher torque capacity in smaller sized sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Will keep contaminants and water out.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors arranged new criteria for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration today and a truly future proof alternative. The EP gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the engine frame providing for unparalleled integration opportunities.
EP gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total solution for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is certainly dirt tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the usage of additional enclosures. Full rated output is available at the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique combination of optimized worm wheel materials with unique lubricants and optimized form, this powerful geared engine achieves high levels of performance and torque. The low contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The use of condition of the art helical and worm equipment combinations affords optimum performance fulfilling a wide variety of ratio requirements. The 800 BR is functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All systems shipped pre-lubed for your particular mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Double and triple reduction ratios
Flanged or foot mounted
All devices adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared electric motor. A favorably priced choice for the standard duties anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is upon the motor shaft. This integrated small design can be an essential aspect for the high accuracy and the incredible stiffness of EP geared motors.
For vector-controlled inverter operation utilization of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision ground. The worm tires are made from particular wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are manufactured from top quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The external ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with durable walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Tags:

Recent Posts

Find Us

China Sprocket Co., Ltd.

Mail: [email protected]

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Contact us

Ever-power Sprocket Co., Ltd.

Tel: +86-571-88220653/88220971
Fax: +86-571-88220651

Mail: [email protected]

WhatsApp/Wechat/Telegram/Line/Viber:
contact us

Addr: SHENHUA ROAD,HANGZHOU, ZHEJIANG , CHINA. 310030

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Hours:
Monday—Friday: 9:00AM–6:00PM
Saturday & Sunday: 10:00AM–4:00PM