“H” CLASS Refuse Drag Chains (H102/H104/H110/H112/H116/H120/H480)

“H” CLASS Refuse Drag Chains is utilized for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Due to its large, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable transporting capacity when managed at moderate speeds.
The front face of each barrel is flat, providing a broad area to push material along the trough and also to keep carefully the chaim from riding over the top of the material. The rounded internal part of the barrel is carefully shaped to create excellent sprocket get in touch with. Sidebars are reinforced with wearing sneakers which provide both
additional wearing Transmission Chain surface area and stiffening for the link. A vertical member on each sidebar assures added hyperlink rigidity and defends the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This durable working chain is available in a pitch range of 5.000 to 8.000 inches. Each hyperlink is produced in accordance with manufacturer’s specifications and may be interchanged with links made by various other chain producers. “H”CLASS Refuse Drag Chain comes in riveted construction only. Grease chambers, cored into each link’s barrel, keep grease which lubricates pins.
Wide faced sprockets, either of machined or cast metal, are recommended for”H” class Refuse Drag Chain procedure. Links should always be run in the direction of the closed barrel.