The EP Greenhouse gear driver is a compact and lightweight reduction gear reducer with a limit switch system that’s suitable for assembly of a locally available electric electric motor. The gear reducer can be used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gearbox can be rainproof and windproof. The gear driver includes a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise gear driver for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is usually locked when the reduction reducer isn’t running. The completely sealed reduction gear reducer comes with an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all conditions, even at high temps. Thanks to the use of an growth chamber, the gear reducer can be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the gear reducer in optimum condition because of its entire operating life time. The gear reducer is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s maximum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures 
of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).
