The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with a built-in limit switch system that’s suitable for assembly of a locally available electric motor. The Gearbox is utilized in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is certainly rainproof and windproof. The Gearbox includes a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.
The gear reduction motor low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny ensures that the drive shaft is locked when the reduction gearbox isn’t running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all circumstances, even at high temperature ranges. Thanks to the usage of an growth chamber, the Gearbox can be installed in any position. There are no restrictions, since there is no need for a bleed connect. The sealed reduction gearbox keeps the gear essential oil of the Gearbox in optimum condition because of its entire operating life time. The Gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
THE APPARATUS box reduction gearbox has an FT85 motor assembly flange, on to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an included chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit switch system is accessible and easy to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).