Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally Electric Fan Motor detached as observed in the photos. (Discover “Control Notice” below for modify type.)
T (See “Program Notice” below for make use of in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 
and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). In the event that you order several engine at a time, we can do our best to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan program. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric electric motor will overheat and enter automated thermal overload if run in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may have a steeper blade position.)
Origin: This electric motor is manufactured in China.
