DC MOTOR PUMP GROUP one
Standard Description
Consisting of a hefty duty DC motor as well as the 
CB1S gear pump, this pump motor group is surely an great hydraulic power unit for mobile hydraulic equipments, such as auto carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a 4.5″ DC motor and a CBSR gear pump that has a typical power up/gravity down circuit having a relief valve, a check valve in addition to a solenoid release valve.
Special Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned before mounting the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which must also be clean and free of impurities. N46 hydraulic oil is recommended.
four. The power unit should be mounted horizontally.
5. The relief valve stress is preset about 25% higher than the operating strain.
6. Flow handle valve for lowing velocity adjustment is available unpon request.