Specifications
Precision grade JIS quality N9 (JIS B1702-1: 1998) JIS grade 5 (JIS B1702: 1976)
Reference
portion of gear Normal plane
Gear teeth Standard complete depth
Normal
pressure angle 20°
Helix angle 45°
Material CAC702
① When mating screw gears manufactured from the same material they may trigger abrasion and scoring. It is suggested to mate Screw Gears made up of different materials.
② The allowable torques demonstrated in the table will be the calculated values according to the assumed usage conditions.
③ The backlash values shown in the table will be the theoretical values for the backlash in the standard direction of a set ofidentical gears in mesh.
④ For Aluminum-Bronze Screw Gears offset shaft applications, match a RH with a RH, or LH with a LH, to create a set of screw gears. For parallel shaft applications,
mesh reverse hands (RH and LH) of helical equipment sets.
⑤ If the bore diameter can 
be less than φ 4, then your bore tolerance class is definitely H8. If the bore diameter is certainly φ 5 or φ 6, and the hole length (total length) exceeds 3 times the diameter, then the class is also H8.
