900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes referred to as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with one or two holes per link, can be fitted with overlapping beaded carrier slats to create a continuing apron conveyor for intermediate carrier program.
The pin holes at the closed end of the 900 Class hyperlink are provided with smooth Transmission Chain bushings which are press-fitted into the links and keyed into place. The bushings are renewable and can be powered out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each side of the open up end of the links, to support double sprockets. The objective of this driving method is to get rid of the possibility of materials build-up in the sprocket get in touch with area, which often causes the chain to leap the sprocket. Heavy ribs rigidly reinforce these driving barrels.
Our 900 Course chain links, with tensile strength from 22,500 to 32,500 pounds, can be found with large sliding surfaces to lessen chain wear and prolong chain life. Broad wearing areas and large cross sections synergy to provide a considerable link which is manufactured according to manufacturer’s requirements and will perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in one direction; links should run in direction of their closed narrow end.
Available in cottered construction only, 900 Class Chain can be assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the driving barrels to prevent pin rotation. Pin rotation during procedure would result in wear on the inside of the bushing. Both the head of the pin and the cottered end of the pin are secured by cast lugs on the barrel end of the links.
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon steel heat treated pins and carbon steel case hardened bushings as regular. However, stainless pins and bushings could be provided when specified.