Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where an easy to match, high torque result is required. Ideal for student based projects which includes robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The engine is snap fitted into its cradle to engage the gear and worm.
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at suprisingly low voltages. We advise that you use stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on small threaded end of the shaft, although it is not particularly intended to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new requirements for reliability, performance and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a really future proof answer. The Ever-Power gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in option positions rotated in 90º steps around the engine frame offering for unparalleled integration options.
Ever-Power gear motors comply with North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total solution for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outside or in wet and dusty environments without the utilization of additional enclosures. Full rated output is offered by the result shaft of the unit.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the option for applications requiring a corner turn, optional dual result, or an inability for the motor to be back again driven. The DC correct angle gear motors are created for continuous and intermittent duty procedure. Our right angle equipment reducers were created with many mounting plate choices, making them perfect for a variety of DC engine based applications. We offer 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a little package size. Worm Equipment Motors are great for applications that want a self- locking or breaking feature because the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High worm motor Durability
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Seats / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will continue to work with you to design and produce a Worm Gear Electric motor that may optimize the functionality of your unique application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor runs on the metal gear box for toughness and a higher torque output. Due to the special mechanical structure of the worm drive the engine output shaft can be self locking and may not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and will attain 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are necessary. Our worm geared motors are therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions allow simple and effective cleaning of the drive program.
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its unique requirements. The EP series worm gear motors could be quickly and effectively adapted to meet your needs.
Worm gear devices impress with their high power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on components to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field set up, but we will also be happy to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes this product ideally suited for severe and demanding industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and result flanges). The housings are created in light weight construction out of aluminium die cast. Electric motor attachment is realised generally through IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most ideal for applications where an easy to fit, high torque result is required, nylon housing and gear, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where a simple to match, high torque output is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) is not reversible when using large reduction ratios, due to the higher friction involved between the worm and worm-wheel, when usually a single start (1 spiral) worm can be used. This can be an advantage when it is desired to get rid of any probability of the output driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor