Single and dual reduction planetary equipment drives to be used with electric, hydraulic, air flow motors or mechanical power input from high quickness, low torque sources to deliver decreased speeds at increased torques. The input side has standard SAE pads for motor mounting. Available in the three output configurations shown below. Many units could be furnished with an integral parking brake.
Solitary reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.
Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for installation vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.
Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 is offered with or without essential parking Plastic Gear Rack brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring gear to minimize backlash growth due to wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.
