Flanged Sleeve Overview

Limited End Float Spacer Kind
The addition of plates restricts axial travel to the drive or driven shaft. The spacer makes it feasible to take away the hubs from either shaft without disturbing the connected units.
Vertical Floating Shaft Kind
The reduce coupling has a hardened crowned button inserted while in the plate from the decrease hub. The complete floating assembly rest within the button. Optional construction on the upper coupling could be a rigid hub around the floating shaft using a flex half about the leading.
Vertical Kind
This coupling has the same horsepower, RPM and misalignment capabilities because the typical couplings of corresponding sizes. A plate which has a hardened crowned button rests about the decrease shaft which supports the bodyweight of your sleeve.
Insulated Kind
Utilization of a non-metallic material in between flanges and around the bolts prevents any stray currents from a single shaft for the other.
Jordan Style
Utilised on Jordan machines and refiners, this layout is very similar to your slide type coupling except the lengthy hub is split and secured towards the shaft that has a bolt clamp. This permits brief axial adjustment of the Jordan shafts i this hub.
Engineered Shear Pin Sort
Shear pin couplings are primarily applied to restrict transmitted torque to a redetermined load. THis in flip disconnectes the driver and driven shafts if torque exceeds the specified limits. These are especially suited to protect equipment when jams arise. Elements are re-useable soon after pins shear. The coupling will retain lubricant to get a brief period to allow gear to get shut down.
Brakewheel and Brake Disc Sort
Replaceable brakewheel and brake disc piloted around the outside diameter of the common sleeve and/or rigid hub. Offers a preference of applying braking work to the load or driving motor.
Double Engagement Half Gear Form
The two internal and external teeth in the single sleeve. Is often bolted to a rotating flywheel, shaft or drum to connect driver or driven machine using a shaft extension. This coupling has precisely the same options, ratings and misalignment capability because the common group of couplings.
Rigid Alloy Steel FARR Sort
Male/Female piloted rigid coupling coupling with keeper plates. This coupling is used whenever a rigid connection is required in between the minimal speed shaft of the gearbox and also the head shaft of a conveyor, bucket elevator, mixer or any overhung or suspended load.